Vertical Stack

Easy Riser Basic

Part Number: V2-B

The Easy Riser Basic Vertical Stack (V2-B) is a low-static (up to .25 ESP) fan coil with a draw-through design. The V2-B galvanized steel cabinet is 88 inches in height and is insulated with ½-inch thick, over three pound density, neoprene-coated fiberglass. The V2-B units have full easy access through the return-air grille to the ½-inch OD copper tube coil, easy slide-out blower/motor assembly with quick-connect plug and a galvanized steel, powder-coat epoxy drain pan covered with ⅛-inch thick insulation. The V2-B is designed for concealed applications along walls and in corners of the room. Risers are ordered separately due to size changes throughout the building.

Cooling Capacity

V2 Series vertical stack fan coils have been rated in accordance with AHRI Standard 440-2005 for room fan-coils air-conditioners and are certified by AHRI to meet the following product performance ratings:

Based on 80°F DB and 67°F WB EAT, 45°F EWT, 10°F temperature rise, high fan speed. Motor voltage 115/1/60 power source. Air flow under dry coil conditions. Water pressure drops shown in feet of water.

Heating Performance

Based on 70°F DB EAT, 180°F EWT, 40°F temperature drop, high fan speed. Motor voltage 115/1/60 power source.
Air flow under dry coil conditions. Water pressure drops shown in feet of water.

Features

300 to 1,200 CFM
Low-cost installation in multistory facilities, designed for concealed applications along room walls or in corners
88″ height
Draw-through design
Heavy-gauge galvanized steel cabinet insulated with 1/2″ thick, over three-pound density, neoprene-coated fiberglass
One supply-air opening that maybe designated left, right, front or top. 1,200 CFM model requires two openings
Half-inch return-air collar for drywall installation
Coils are manufactured of copper tube with aluminum fins and are 100% underwater pressure tested to 350 PSI with a 300 PSI working pressure
Expansion compensation loops assures a quieter coil operation
Galvanized drain pan is finished with a powder-coated epoxy, 1/8″ thick insulation and has a formed P-trap drain connection
Easy slide-out, draw-through blower and motor assembly
Three-speed, 115/1/60 motor with quick-connect plug
Controls and motors are factory-wired and terminated in a junction box for single-point power supply
One-inch fiberglass, throwaway filter
Serviceability features include full access through the return-air grill to the slide-out coil; slide-out motor and blower assembly which is equipped with a quick-connect plug; filter and drain pan
Protective covers keep the grille openings free of debris during shipment and construction
Individually tagged, crated and shipped as scheduled for installation
ETL and AHRI certified; 100% factory tested

Accessories

Accessories Options

Valve package controls – wide selection of factory-mounted valves and controls
Pedestal Bases
Return access panels
Framed
Hanging style with camlocks
Sound shields
Custom paint
Supply grilles
Single-deflection
Double-deflection
Opposed blade dampers (OBD)
Custom paint
Outside air openings
Manual
Motorized

Dimensions

Options

Systems

DX
Chilled-Water
Hot-Water
Electric Resistance
Steam
In any combination of the above

Insulation

Thickness up to 1″
Fiberglass
Foil-face
Elastomeric

Coil

Copper fins/tubes
Phenolic-coated
Stainless-steel end plates
Right, left or rear connections
TXV – factory-mounted
Freeze protection
Custom fin spacing

Drain Pan

Stainless-steel
Extended
Drip tray
Condensate float switch
Condensate pumps

Cabinets

Marine duty
Extensions

Electrical

Motors
- 115, 208, 230 and 277
- Single or three phase
- 50 or 60Hz
- ECM
Line or low voltage
1 to 7.5 kW electric resistance heat
Disconnects
- Fused
- Non-fused
Condensate Float Switch
Condensate pumps
Thermostats
UV Light
Controls
Flow control

Risers

Pipe sizes up to 4″
Type M, L or K
Insulation thickness up to 1″
Fiberglass
Elastomeric (Closed-Cell)

Further Information

• Coil connections may be right, left or rear.
• Coil connections determined by facing the return-air grille.
• Electrical junction box is located above the blower and motor assembly.
• Unit must be installed level and condensate drain lines should be trapped.
• Removable drain pan is powder-coated epoxy with a 1/8” thick closed-cell insulation and has 3/4” NPT primary and secondary drain connections.
• Entire cabinet, scroll and blower wheel are heavy-gauge, galvanized steel.
• Coil Connections: 1/2” CW on V2003-012 and 1/2” HW on V2003-012.