Horizontal Ceiling Mount

Low-Static Horizontal Deluxe Painted Cabinet

Part Number: H1-D

The Horizontal Deluxe (H1-D), low-static (up to .25 ESP), fan coil is intended for “free-blow” exposed ceiling-mounted applications. The H1-D comes with a coil, blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. Deluxe cabinets are constructed of cold-rolled galvanized steel, insulated with ½-inch, over three pound density, neoprene-coated fiberglass and finished with a soft-white powder-coat epoxy. This unit is ideal for remodels where adding ductwork is limited.

Cooling Capacity

H1 (Low Static) Series horizontal fan coils have been rated in accordance with AHRI Standard 440-2005 for room fan-coil air-conditioners and are certified by AHRI to meet the following product performance ratings:

Based on 80°F DB and 67°F WB EAT, 45°F EWT, 10°F temperature rise, high fan speed. Motor voltage 115/1/60 power source. Air flow under dry coil conditions. Water pressure drops shown in feet of water.

Heating Performance

Based on 70°F DB EAT, 180°F EWT, 40°F temperature drop, high fan speed. Motor voltage 115/1/60 power source.
Air flow under dry coil conditions. Water pressure drops shown in feet of water.

Features

200 to 1,200 CFM
Low static, direct-drive designed for jobs where low-static pressure is required
Blow-through design
Equipped with front supply and bottom return
Designed for horizontal, exposed ceiling mounting
Fully exposed cabinet finished with a soft-white, powder coated epoxy and includes a swing-down, hinged return-air grille/access door
Single-deflection supply air grille
Excellent choice when the addition of ductwork is limited
One-inch fiberglass, throwaway filter
Heavy-gauge galvanized steel cabinet insulated with 1/2″ thick, over three-pound density, neoprene-coated fiberglass
Coils are manufactured of copper tube with aluminum fins and are 100% underwater pressure tested to 350 PSI with a 300 PSI working pressure
Three-speed, 115/1/60 motor with quick-connect plug
Galvanized drain pan is finished with a powder-coated epoxy, 1/8″ thick insulation and features primary and secondary drain connections
Controls and motors are factory-wired and terminated in a junction box for single-point power supply
One-inch duct collar on return- and supply-air openings
Protective covers keep the grille openings free of debris during shipment and construction
Individually tagged, crated and shipped as scheduled for installation
ETL and AHRI certified; 100% factory tested

Accessories

Accessories Options

Thermostats
Ultraviolet lights
Condensate float switch
Condensate pumps
TXV – factory-mounted
Controls – wide selection of factory-mounted valves and controls
Flow-control pump for water heating applications

Dimensions

Options

Systems

DX
Chilled-Water
Hot-Water
Electric Resistance
Steam

In any combination of the above

Insulation

Thickness up to 1″
Fiberglass
Foil-face
Elastomeric

Coils

Copper fins/tube
Phenolic-coated
Stainless-steel end plates
Right, left or opposite-end connections
TXV – factory-mounted
Freeze protection
Custom fin spacing

Drain Pans

Stainless-steel
Extended
Drip tray
Condensate float switch
Condensate pumps

Filters

Washable
Pleated

Cabinets

Custom colours
Marine duty

Electrical

Motors
- 115, 208, 277
- Single or three phase
- 50 or 60Hz
- ECM
- Line or low voltage
1 to 5 kW electric resistance heat
Disconnects
- Fused
- Non-fused
Condensate float switch
Condensate pumps
Thermostats
UV Light
Controls
Flow control

Further Information

None available with this product.