406.845.3263
LinkedIn
Dealer Locations

High Performance Cased/Closet Heat Only Painted Cabinet (C2-O)

The Cased Vertical (C2-O) is a Heat Only model. It is a high performance, high-static (up to .50 ESP) ducted vertical fan coil for installation virtually anywhere, The front panel is removable for easy filter removal and service access to the slide-out blower, equipped with a quick-connect plug. The top discharge opening has a one-inch duct collar. This heat only version does not need a drain pan and may be installed horizontally. The C2-O is finished in a soft-white powder-coated epoxy.

  • HEATING PERFORMANCE

    Notes: 1) Based on 70°F DB EAT, 180°F EWT, 40°F temperature drop, high fan speed. Motor voltage 115/1/60 power source.
    Air flow under dry coil conditions. Water pressure drops shown in feet of water.

FEATURES
OPTIONS
ACCESSORIES
FEATURES

Features

  • 400 to 2,200 CFM
  • Heat only, high-static ducted vertical fan coil manufactured of heavy-gauge galvanized steel, insulated with 1/2″ thick, over three-pound density, neoprene-coated fiberglass, finished with a soft-white powder-coat epoxy and comes with an easy slide-out motor/blower assembly with quick-connect plug
  • Top-supply with bottom return
  • Installation virtually anywhere
  • Removable front panel for easy maintenance
  • One-inch discharge duct flange is standard on the top panel
  • Coils are manufactured of copper tube with aluminum fins and are 100% underwater pressure tested to 350 PSI with a 300 PSI working pressure
  • Three-speed, 115/1/60 motor with quick-connect plug
  • Draw-through design, easy slide-out blowers with quick-connect plug
  • Controls and motors are factory-wired and terminated in a junction box for single-point power supply
  • One-inch duct collar on return- and supply-air openings
  • Protective covers keep the grille openings free of debris during shipment and construction
  • Individually tagged, crated and shipped as scheduled for installation
  • ETL and AHRI certified; 100% factory tested
OPTIONS

Options

Systems

  • Hot-Water
  • Electric Resistance

Insulation

  • Thickness up to 1″
  • Fiberglass
  • Foil-face
  • Elastomeric

Coil

  • Copper fins/tubes
  • Phenolic-coated
  • Stainless-steel end plates
  • Right left or top connections
  • Freeze protection
  • Custom fin spacing

Cabinets

  • Marine duty
  • Custom paint
  • Extensions
  • Custom paint
  • Pedestal base
  • Front-return air grille
  • Return-air grille

Electrical

  • Motors
    • 115, 208, 230 and 277
    • Single or three phase
    • 50 or 60Hz
    • ECM
  • Line or low voltage
  • Disconnects
    • Fused
    • Non-fused
  • Thermostats
  • Controls
  • Flow control
ACCESSORIES

Accessories Options

  • Valve package controls – wide selection of factory-mounted valves and controls
  • Pedestal base
  • Outside air openings
    • Manual
    • Motorized
  • Thermostats
  • Condensate float switch
  • Condensate pumps
  • Pedestal base

Literature

Manual

Drawings

DWG (2D)
Menu