High-Performance Horizontal Ceiling Mount

High-Performance Horizontal Ceiling-Mount with Bottom Return-Air Plenum

Part Number: H3-Q

The High-Performance Bottom Air-Return Plenum Horizontal (H3-Q) is a high-static (up to .50 ESP) fan coil that comes with a coil, blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. The galvanized steel plenum is insulated with ½-inch thick, over three-pound density, neoprene-coated fiberglass. The plenum conceals the fan and motor assembly that is easily accessed for service by removing the back panel. This unit is easily mounted above ceilings, in closets, and in hallways.

Cooling Capacity

H3 Series Hi-Performance Horizontal fan coils have been rated in accordance with AHRI Standard 440-2005 for room fan-coil air-conditioners and are certified by AHRI to meet the following product performance ratings:

Based on 80°F DB and 67°F WB EAT, 45°F EWT, 10°F temperature rise, high fan speed. Motor voltage 115/1/60 power source.
Air flow under dry coil conditions. Water pressure drops shown in feet of water.

Heating Performance

Based on 70°F DB EAT, 180°F EWT, 40°F temperature drop, high fan speed. Motor voltage 115/1/60 power source.
Air flow under dry coil conditions. Water pressure drops shown in feet of water.

Features

400 to 2,200 CFM
Manufactured of heavy-gauge galvanized steel and insulated with 1/2″ thick, over three-pound density, neoprene-coated fiberglass; insulated drain pan with primary and secondary drain connections constructed of galvanized metal and finished with a powder-coated epoxy, easily removable motor/blower assembly with quick-connect plug and a galvanized bottom return-air plenum
Ideal for mounting above ceilings, in closets, hallways or bathroom areas
The plenum conceals the blower motor which is easily accessible for servicing by removing the bottom panel
No exterior cabinet
Coils are manufactured of copper tube with aluminum fins and are 100% underwater pressure tested to 350 PSI with a 300 PSI working pressure
Galvanized drain pan is finished with a powder-coated epoxy, 1/8″ thick insulation and features primary and secondary drain connections
Three-speed, 115/1/60 motor with quick-connect plug
Easy slide-out, blow-through blower and motor assembly
Controls and motors are factory-wired and terminated in a junction box for single-point power supply
One-inch fiberglass, throwaway filter
One-inch duct collar on return- and supply-air openings
High-static motor is designed for jobs where high-static pressure (0.50 max) is required
Protective covers keep the grille openings free of debris during shipment and construction
Individually tagged, crated and shipped as scheduled for installation
ETL and AHRI certified; 100% factory tested

Accessories

Accessories Options

Valve package controls – wide selection of factory-mounted valves and controls
Supply grilles
- Single-deflection
- Double-deflection
Thermostats
Condensate float switch
Condensate pumps
Controls – wide selection of factory-mounted valves and controls

Dimensions

Options

Systems

DX
Chilled-Water
Hot-Water
Electric Resistance
Steam

In any combination of the above

Insulation

Thickness up to 1″
Fiberglass
Foil-face
Elastomeric

Coil

Copper fins/tubes
Phenolic-coated
Stainless-steel end plates
Right, left connections or opposite end connection
TXV – factory-mounted
Freeze protection
Custom fin spacing

Drain Pan

Stainless-steel
Extended
Drip tray
Condensate float switch
Condensate pumps

Cabinets

Marine duty

Electrical

Motors
- 115, 208, 230 and 277
- Single or three phase
- 50 or 60Hz
- ECM
Line or low voltage
1 to 9 kW electric resistance heat
Disconnects
- Fused
- Non-fused
Thermostats
UV Light
Controls
Flow control

Further Information

None available with this product.