High-Performance Horizontal Ceiling Mount

High Performance Horizontal Flush Framed Bottom Supply and Return

Part Number: H3-F

The High Performance Horizontal Flush Bottom Supply and Return (H3-F) is a high-static (up to .50 ESP) recessed fan coil designed for flush ceiling applications and designed to accommodate ducted supply air. The H3-F comes with a coil, blower/motor assembly with quick-connect plug and a galvanized steel, powder-coated epoxy drain pan covered with ⅛-inch thick insulation. The galvanized steel cabinet is insulated with ½-inch thick, over three pound density, neoprene-coated fiberglass. The telescoping frame and hinged access panel of the H3-F allows it to fit in any type of ceiling. The access panel and telescoping frame are finished with a durable soft-white powder-coated epoxy. This unit is easily mounted above ceilings, in closets, and in hallways.

Cooling Capacity

H3 Series Hi-Performance Horizontal fan coils have been rated in accordance with AHRI Standard 440-2005 for room fan-coil air-conditioners and are certified by AHRI to meet the following product performance ratings:

Based on 80°F DB and 67°F WB EAT, 45°F EWT, 10°F temperature rise, high fan speed. Motor voltage 115/1/60 power source. Air flow under dry coil conditions. Water pressure drops shown in feet of water.

Heating Performance

Based on 70°F DB EAT, 180°F EWT, 40°F temperature drop, high fan speed. Motor voltage 115/1/60 power source.
Air flow under dry coil conditions. Water pressure drops shown in feet of water.

Features

400 to 2,200 CFM
Manufactured of heavy-gauge galvanized steel and insulated with 1/2″ thick, over three-pound density, neoprene-coated fiberglass; insulated drain pan with primary and secondary drain connections constructed of galvanized metal and finished with a powder-coated epoxy, easily removable motor/blower assembly with quick-connect plug and a telescoping frame and access panel
Flush model is a recessed unit for flush ceiling applications
The telescoping frame and hinged access panel allow it to fit any type of ceiling
Access panel finished in a soft-white, powder-coated epoxy
Coils are manufactured of copper tube with aluminum fins and are 100% underwater pressure tested to 350 PSI with a 300 PSI working pressure
Galvanized drain pan is finished with a powder-coated epoxy, 1/8″ thick insulation and features primary and secondary drain connections
Three-speed, 115/1/60 motor with quick-connect plug
Easy slide-out, blow-through blower and motor assembly
Controls and motors are factory-wired and terminated in a junction box for single-point power supply
One-inch fiberglass, throwaway filter
One-inch duct collar on return- and supply-air openings
High-static motor is designed for jobs where high-static pressure (0.50 max) is required
Protective covers keep the grille openings free of debris during shipment and construction
Individually tagged, crated and shipped as scheduled for installation
ETL and AHRI certified; 100% factory tested

Accessories

Accessories Options

Valve package controls – wide selection of factory-mounted valves and controls
Supply grilles
- Single-deflection
- Double-deflection
Thermostats
Condensate float switch
Condensate pumps
Controls – wide selection of factory-mounted valves and controls

Dimensions

Options

Systems

DX
Chilled-Water
Hot-Water
Electric Resistance
Steam

In any combination of the above

Insulation

Thickness up to 1″
Fiberglass
Foil-face
Elastomeric

Coil

Copper fins/tubes
Phenolic-coated
Stainless-steel end plates
Right, left connections or opposite end connection
TXV – factory-mounted
Freeze protection
Custom fin spacing

Drain Pan

Stainless-steel
Extended
Drip tray
Condensate float switch
Condensate pumps

Cabinets

Marine duty
Custom colors

Electrical

Motors
- 115, 208, 230 and 277
- Single or three phase
- 50 or 60Hz
- ECM
Line or low voltage
1 to 9 kW electric resistance heat
Disconnects
- Fused
- Non-fused
Condensate float switch
Condensate pumps
Thermostats
UV Light
Controls
Flow Control

Further Information

For 600-1200 CFM models:

All sizes shown in inches.
• Right-hand unit shown, left-hand unit opposite.
• Coil connections determined by facing the supply-air opening.
• Electrical junction box is located on the same side as the coil connections.
• Unit must be installed level and condensate drain lines should be trapped.
• Drain pan is powder-coated epoxy with a 1/8” thick closed-cell insulation and has 3/4” NPT primary and secondary drain connections.
• Entire cabinet, scroll and blower wheel are heavy-gauge, galvanized steel.
• Coil Connections: 1/2” CW on H3006, 3/4” on H3008-012 and 1/2” HW on H3006-012.

For 1500-2200 CFM models:

• All sizes shown in inches.
• Right-hand unit shown, left-hand unit opposite.
• Coil connections determined by facing the supply-air opening.
• Electrical junction box is located on the same side as the coil connections.
• Unit must be installed level and condensate drain lines should be trapped.
• Drain pan is powder-coated epoxy with a 1/8” thick closed-cell insulation and has 3/4” NPT primary and secondary drain connections.
• Entire cabinet, scroll and blower wheel are heavy-gauge, galvanized steel.
• Coil Connections: 3/4” CW on H3015-022 and 1/2” HW on H3015-022.